Electric Motor, Power Tool, and Related Repairers
Repair, maintain, or install electric motors, wiring, or switches.
Sample of reported job titles: Electric Motor Mechanic, Electric Motor Repairman, Electric Motor Winder, Electro Mechanic, Maintenance Technician, Power Tool Repair Technician, Repair Technician, Service Technician, Tool Repair Technician, Tool Technician
Tasks | Technology Skills | Tools Used | Knowledge | Skills | Abilities | Work Activities | Detailed Work Activities | Work Context | Job Zone | Education | Credentials | Interests | Work Styles | Work Values | Related Occupations | Wages & Employment | Job Openings | Additional Information
- Inspect and test equipment to locate damage or worn parts and diagnose malfunctions, or read work orders or schematic drawings to determine required repairs.
- Reassemble repaired electric motors to specified requirements and ratings, using hand tools and electrical meters.
- Measure velocity, horsepower, revolutions per minute (rpm), amperage, circuitry, and voltage of units or parts to diagnose problems, using ammeters, voltmeters, wattmeters, and other testing devices.
- Repair and rebuild defective mechanical parts in electric motors, generators, and related equipment, using hand tools and power tools.
- Lift units or parts such as motors or generators, using cranes or chain hoists, or signal crane operators to lift heavy parts or subassemblies.
- Record repairs required, parts used, and labor time.
- Disassemble defective equipment so that repairs can be made, using hand tools.
- Adjust working parts, such as fan belts, contacts, and springs, using hand tools and gauges.
- Lubricate moving parts.
- Read service guides to find information needed to perform repairs.
- Inspect electrical connections, wiring, relays, charging resistance boxes, and storage batteries, following wiring diagrams.
- Scrape and clean units or parts, using cleaning solvents and equipment such as buffing wheels.
- Weld, braze, or solder electrical connections.
- Verify and adjust alignments and dimensions of parts, using gauges and tracing lathes.
- Steam-clean polishing and buffing wheels to remove abrasives and bonding materials, and spray, brush, or recoat surfaces as necessary.
- Set machinery for proper performance, using computers.
- Test equipment for overheating, using speed gauges and thermometers.
- Reface, ream, and polish commutators and machine parts to specified tolerances, using machine tools.
- Maintain stocks of parts.
- Cut and form insulation, and insert insulation into armature, rotor, or stator slots.
- Assemble electrical parts such as alternators, generators, starting devices, and switches, following schematic drawings and using hand, machine, and power tools.
- Solder, wrap, and coat wires to ensure proper insulation.
- Rewire electrical systems, and repair or replace electrical accessories.
- Clean cells, cell assemblies, glassware, leads, electrical connections, and battery poles, using scrapers, steam, water, emery cloths, power grinders, or acid.
- Rewind coils on cores in slots, or make replacement coils, using coil-winding machines.
- Test conditions, fluid levels, and specific gravities of electrolyte cells, using voltmeters, hydrometers, and thermometers.
- Add water or acid to battery cell solutions to obtain specified concentrations.
- Pour compounds into transformer-case terminal openings to seal out moisture.
- Remove and replace defective parts such as coil leads, carbon brushes, and wires, using soldering equipment.
- Hammer out dents and twists in tools and equipment.
- Drain and filter transformer oil and refill transformers with oil until coils are submerged.
- Seal joints with putty, mortar, and asbestos, using putty extruders and knives.
- Repair and operate battery-charging equipment.
- Sharpen tools such as saws, picks, shovels, screwdrivers, and scoops, either manually or by using bench grinders and emery wheels.
Find occupations related to multiple tasks
- Analytical or scientific software — Commutator profiling software; Motor testing software
- Computer aided design CAD software — Autodesk AutoCAD
- Data base user interface and query software — Data entry software ; Microsoft Access
- Electronic mail software — Microsoft Outlook
- Enterprise resource planning ERP software — SAP
- Facilities management software — Computerized maintenance management system CMMS
- Object or component oriented development software — Python
- Office suite software — Microsoft Office
- Presentation software — Microsoft PowerPoint
- Spreadsheet software — Microsoft Excel
- Word processing software — Microsoft Word
Hot Technology — a technology requirement frequently included in employer job postings.
back to top
- Mechanical — Knowledge of machines and tools, including their designs, uses, repair, and maintenance.
- English Language — Knowledge of the structure and content of the English language including the meaning and spelling of words, rules of composition, and grammar.
- Production and Processing — Knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods.
- Administration and Management — Knowledge of business and management principles involved in strategic planning, resource allocation, human resources modeling, leadership technique, production methods, and coordination of people and resources.
- Customer and Personal Service — Knowledge of principles and processes for providing customer and personal services. This includes customer needs assessment, meeting quality standards for services, and evaluation of customer satisfaction.
- Mathematics — Knowledge of arithmetic, algebra, geometry, calculus, statistics, and their applications.
back to top
- Repairing — Repairing machines or systems using the needed tools.
- Equipment Maintenance — Performing routine maintenance on equipment and determining when and what kind of maintenance is needed.
- Troubleshooting — Determining causes of operating errors and deciding what to do about it.
- Critical Thinking — Using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems.
- Equipment Selection — Determining the kind of tools and equipment needed to do a job.
- Quality Control Analysis — Conducting tests and inspections of products, services, or processes to evaluate quality or performance.
- Complex Problem Solving — Identifying complex problems and reviewing related information to develop and evaluate options and implement solutions.
- Operations Monitoring — Watching gauges, dials, or other indicators to make sure a machine is working properly.
- Operation and Control — Controlling operations of equipment or systems.
- Active Listening — Giving full attention to what other people are saying, taking time to understand the points being made, asking questions as appropriate, and not interrupting at inappropriate times.
- Judgment and Decision Making — Considering the relative costs and benefits of potential actions to choose the most appropriate one.
- Installation — Installing equipment, machines, wiring, or programs to meet specifications.
- Reading Comprehension — Understanding written sentences and paragraphs in work related documents.
- Speaking — Talking to others to convey information effectively.
- Systems Analysis — Determining how a system should work and how changes in conditions, operations, and the environment will affect outcomes.
back to top
- Finger Dexterity — The ability to make precisely coordinated movements of the fingers of one or both hands to grasp, manipulate, or assemble very small objects.
- Near Vision — The ability to see details at close range (within a few feet of the observer).
- Problem Sensitivity — The ability to tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing there is a problem.
- Manual Dexterity — The ability to quickly move your hand, your hand together with your arm, or your two hands to grasp, manipulate, or assemble objects.
- Arm-Hand Steadiness — The ability to keep your hand and arm steady while moving your arm or while holding your arm and hand in one position.
- Information Ordering — The ability to arrange things or actions in a certain order or pattern according to a specific rule or set of rules (e.g., patterns of numbers, letters, words, pictures, mathematical operations).
- Deductive Reasoning — The ability to apply general rules to specific problems to produce answers that make sense.
- Hearing Sensitivity — The ability to detect or tell the differences between sounds that vary in pitch and loudness.
- Inductive Reasoning — The ability to combine pieces of information to form general rules or conclusions (includes finding a relationship among seemingly unrelated events).
- Visual Color Discrimination — The ability to match or detect differences between colors, including shades of color and brightness.
- Visualization — The ability to imagine how something will look after it is moved around or when its parts are moved or rearranged.
- Control Precision — The ability to quickly and repeatedly adjust the controls of a machine or a vehicle to exact positions.
- Flexibility of Closure — The ability to identify or detect a known pattern (a figure, object, word, or sound) that is hidden in other distracting material.
- Multilimb Coordination — The ability to coordinate two or more limbs (for example, two arms, two legs, or one leg and one arm) while sitting, standing, or lying down. It does not involve performing the activities while the whole body is in motion.
- Oral Comprehension — The ability to listen to and understand information and ideas presented through spoken words and sentences.
- Perceptual Speed — The ability to quickly and accurately compare similarities and differences among sets of letters, numbers, objects, pictures, or patterns. The things to be compared may be presented at the same time or one after the other. This ability also includes comparing a presented object with a remembered object.
- Reaction Time — The ability to quickly respond (with the hand, finger, or foot) to a signal (sound, light, picture) when it appears.
- Speed of Closure — The ability to quickly make sense of, combine, and organize information into meaningful patterns.
- Written Comprehension — The ability to read and understand information and ideas presented in writing.
- Auditory Attention — The ability to focus on a single source of sound in the presence of other distracting sounds.
- Category Flexibility — The ability to generate or use different sets of rules for combining or grouping things in different ways.
- Depth Perception — The ability to judge which of several objects is closer or farther away from you, or to judge the distance between you and an object.
- Extent Flexibility — The ability to bend, stretch, twist, or reach with your body, arms, and/or legs.
- Oral Expression — The ability to communicate information and ideas in speaking so others will understand.
- Rate Control — The ability to time your movements or the movement of a piece of equipment in anticipation of changes in the speed and/or direction of a moving object or scene.
- Selective Attention — The ability to concentrate on a task over a period of time without being distracted.
back to top
- Getting Information — Observing, receiving, and otherwise obtaining information from all relevant sources.
- Identifying Objects, Actions, and Events — Identifying information by categorizing, estimating, recognizing differences or similarities, and detecting changes in circumstances or events.
- Repairing and Maintaining Electronic Equipment — Servicing, repairing, calibrating, regulating, fine-tuning, or testing machines, devices, and equipment that operate primarily on the basis of electrical or electronic (not mechanical) principles.
- Repairing and Maintaining Mechanical Equipment — Servicing, repairing, adjusting, and testing machines, devices, moving parts, and equipment that operate primarily on the basis of mechanical (not electronic) principles.
- Monitor Processes, Materials, or Surroundings — Monitoring and reviewing information from materials, events, or the environment, to detect or assess problems.
- Communicating with Supervisors, Peers, or Subordinates — Providing information to supervisors, co-workers, and subordinates by telephone, in written form, e-mail, or in person.
- Inspecting Equipment, Structures, or Material — Inspecting equipment, structures, or materials to identify the cause of errors or other problems or defects.
- Controlling Machines and Processes — Using either control mechanisms or direct physical activity to operate machines or processes (not including computers or vehicles).
- Processing Information — Compiling, coding, categorizing, calculating, tabulating, auditing, or verifying information or data.
- Organizing, Planning, and Prioritizing Work — Developing specific goals and plans to prioritize, organize, and accomplish your work.
- Evaluating Information to Determine Compliance with Standards — Using relevant information and individual judgment to determine whether events or processes comply with laws, regulations, or standards.
- Handling and Moving Objects — Using hands and arms in handling, installing, positioning, and moving materials, and manipulating things.
- Making Decisions and Solving Problems — Analyzing information and evaluating results to choose the best solution and solve problems.
- Documenting/Recording Information — Entering, transcribing, recording, storing, or maintaining information in written or electronic/magnetic form.
- Performing General Physical Activities — Performing physical activities that require considerable use of your arms and legs and moving your whole body, such as climbing, lifting, balancing, walking, stooping, and handling of materials.
- Estimating the Quantifiable Characteristics of Products, Events, or Information — Estimating sizes, distances, and quantities; or determining time, costs, resources, or materials needed to perform a work activity.
- Operating Vehicles, Mechanized Devices, or Equipment — Running, maneuvering, navigating, or driving vehicles or mechanized equipment, such as forklifts, passenger vehicles, aircraft, or water craft.
- Scheduling Work and Activities — Scheduling events, programs, and activities, as well as the work of others.
- Training and Teaching Others — Identifying the educational needs of others, developing formal educational or training programs or classes, and teaching or instructing others.
- Coaching and Developing Others — Identifying the developmental needs of others and coaching, mentoring, or otherwise helping others to improve their knowledge or skills.
- Coordinating the Work and Activities of Others — Getting members of a group to work together to accomplish tasks.
- Thinking Creatively — Developing, designing, or creating new applications, ideas, relationships, systems, or products, including artistic contributions.
- Updating and Using Relevant Knowledge — Keeping up-to-date technically and applying new knowledge to your job.
- Establishing and Maintaining Interpersonal Relationships — Developing constructive and cooperative working relationships with others, and maintaining them over time.
- Interpreting the Meaning of Information for Others — Translating or explaining what information means and how it can be used.
- Communicating with Persons Outside Organization — Communicating with people outside the organization, representing the organization to customers, the public, government, and other external sources. This information can be exchanged in person, in writing, or by telephone or e-mail.
- Drafting, Laying Out, and Specifying Technical Devices, Parts, and Equipment — Providing documentation, detailed instructions, drawings, or specifications to tell others about how devices, parts, equipment, or structures are to be fabricated, constructed, assembled, modified, maintained, or used.
- Developing and Building Teams — Encouraging and building mutual trust, respect, and cooperation among team members.
- Judging the Qualities of Things, Services, or People — Assessing the value, importance, or quality of things or people.
- Analyzing Data or Information — Identifying the underlying principles, reasons, or facts of information by breaking down information or data into separate parts.
- Guiding, Directing, and Motivating Subordinates — Providing guidance and direction to subordinates, including setting performance standards and monitoring performance.
back to top
Detailed Work Activities
- Inspect mechanical equipment to locate damage, defects, or wear.
- Read work orders or descriptions of problems to determine repairs or modifications needed.
- Adjust equipment to ensure optimal performance.
- Reassemble equipment after repair.
- Communicate with coworkers to coordinate installations or repairs.
back to top
- Face-to-Face Discussions — 68% responded “Every day.”
- Wear Common Protective or Safety Equipment such as Safety Shoes, Glasses, Gloves, Hearing Protection, Hard Hats, or Life Jackets — 76% responded “Every day.”
- Spend Time Using Your Hands to Handle, Control, or Feel Objects, Tools, or Controls — 71% responded “Continually or almost continually.”
- Exposed to Contaminants — 68% responded “Every day.”
- Importance of Being Exact or Accurate — 62% responded “Extremely important.”
- Spend Time Standing — 58% responded “Continually or almost continually.”
- Frequency of Decision Making — 70% responded “Every day.”
- Indoors, Not Environmentally Controlled — 75% responded “Every day.”
- Freedom to Make Decisions — 42% responded “A lot of freedom.”
- Time Pressure — 38% responded “Every day.”
- Work With Work Group or Team — 43% responded “Extremely important.”
- Sounds, Noise Levels Are Distracting or Uncomfortable — 40% responded “Once a week or more but not every day.”
- Exposed to Hazardous Equipment — 42% responded “Every day.”
- Impact of Decisions on Co-workers or Company Results — 30% responded “Important results.”
- Contact With Others — 51% responded “Constant contact with others.”
- Coordinate or Lead Others — 54% responded “Extremely important.”
- Structured versus Unstructured Work — 39% responded “A lot of freedom.”
- Exposed to Hazardous Conditions — 39% responded “Every day.”
- Exposed to Minor Burns, Cuts, Bites, or Stings — 38% responded “Every day.”
- Telephone — 40% responded “Every day.”
- Spend Time Making Repetitive Motions — 31% responded “Continually or almost continually.”
- Duration of Typical Work Week — 53% responded “40 hours.”
- Consequence of Error — 47% responded “Serious.”
- Very Hot or Cold Temperatures — 40% responded “Every day.”
- Physical Proximity — 30% responded “Moderately close (at arm’s length).”
- Responsible for Others’ Health and Safety — 39% responded “Very high responsibility.”
- Responsibility for Outcomes and Results — 42% responded “Very high responsibility.”
- Level of Competition — 34% responded “Moderately competitive.”
- Importance of Repeating Same Tasks — 34% responded “Important.”
- Deal With External Customers — 28% responded “Not important at all.”
- Indoors, Environmentally Controlled — 41% responded “Every day.”
- Spend Time Bending or Twisting the Body — 33% responded “Less than half the time.”
- Spend Time Kneeling, Crouching, Stooping, or Crawling — 44% responded “Less than half the time.”
- Extremely Bright or Inadequate Lighting — 31% responded “Never.”
back to top
|Title||Job Zone Three: Medium Preparation Needed|
|Education||Most occupations in this zone require training in vocational schools, related on-the-job experience, or an associate’s degree.|
|Related Experience||Previous work-related skill, knowledge, or experience is required for these occupations. For example, an electrician must have completed three or four years of apprenticeship or several years of vocational training, and often must have passed a licensing exam, in order to perform the job.|
|Job Training||Employees in these occupations usually need one or two years of training involving both on-the-job experience and informal training with experienced workers. A recognized apprenticeship program may be associated with these occupations.|
|Job Zone Examples||These occupations usually involve using communication and organizational skills to coordinate, supervise, manage, or train others to accomplish goals. Examples include hydroelectric production managers, travel guides, electricians, agricultural technicians, barbers, court reporters, and medical assistants.|
|SVP Range||(6.0 to < 7.0)|
back to top
Percentage of Respondents
|Education Level Required|
|31||High school diploma or equivalent
back to top
back to top
Interest code: RC Want to discover your interests? Take the O*NET Interest Profiler at My Next Move.
- Realistic — Realistic occupations frequently involve work activities that include practical, hands-on problems and solutions. They often deal with plants, animals, and real-world materials like wood, tools, and machinery. Many of the occupations require working outside, and do not involve a lot of paperwork or working closely with others.
- Conventional — Conventional occupations frequently involve following set procedures and routines. These occupations can include working with data and details more than with ideas. Usually there is a clear line of authority to follow.
back to top
- Attention to Detail — Job requires being careful about detail and thorough in completing work tasks.
- Dependability — Job requires being reliable, responsible, and dependable, and fulfilling obligations.
- Cooperation — Job requires being pleasant with others on the job and displaying a good-natured, cooperative attitude.
- Stress Tolerance — Job requires accepting criticism and dealing calmly and effectively with high stress situations.
- Independence — Job requires developing one’s own ways of doing things, guiding oneself with little or no supervision, and depending on oneself to get things done.
- Integrity — Job requires being honest and ethical.
- Adaptability/Flexibility — Job requires being open to change (positive or negative) and to considerable variety in the workplace.
- Initiative — Job requires a willingness to take on responsibilities and challenges.
- Persistence — Job requires persistence in the face of obstacles.
- Analytical Thinking — Job requires analyzing information and using logic to address work-related issues and problems.
- Self Control — Job requires maintaining composure, keeping emotions in check, controlling anger, and avoiding aggressive behavior, even in very difficult situations.
- Leadership — Job requires a willingness to lead, take charge, and offer opinions and direction.
- Achievement/Effort — Job requires establishing and maintaining personally challenging achievement goals and exerting effort toward mastering tasks.
- Concern for Others — Job requires being sensitive to others’ needs and feelings and being understanding and helpful on the job.
- Innovation — Job requires creativity and alternative thinking to develop new ideas for and answers to work-related problems.
- Social Orientation — Job requires preferring to work with others rather than alone, and being personally connected with others on the job.
back to top
- Support — Occupations that satisfy this work value offer supportive management that stands behind employees. Corresponding needs are Company Policies, Supervision: Human Relations and Supervision: Technical.
- Relationships — Occupations that satisfy this work value allow employees to provide service to others and work with co-workers in a friendly non-competitive environment. Corresponding needs are Co-workers, Moral Values and Social Service.
- Working Conditions — Occupations that satisfy this work value offer job security and good working conditions. Corresponding needs are Activity, Compensation, Independence, Security, Variety and Working Conditions.
back to top